Random good picture Not show

31. The formulae of contact stress and sliding velocity of solid-lubricated ball bearings are deduced by Hertzian contact theory and kinematics of ball bearing.

32. Additionally, the self-aligning ball bearing has the lowest friction of all rolling bearings, which enables it to run cooler even at high speeds.

33. In design apply line-glide rail and ball bearing bar forming slipway structure, scheme out flexible replaceable clamp structure.

34. Steel sleeve of excircle and linear ball bearing bore requires sliding tie in with precision.

35. Lift the ram and position the tappet ( with the ball bearing ) inside the tester cup.

36. Under such conditions the balls contact the inner and outer rings only at one point, as in an axially loaded single-row angular contact ball bearing.

37. Unfortunately, many instrument ball bearing applications impose limitations on achieving the ideal EHD film separation.

38. AAA Bearing LTD offers Offers to Tapered roller bearings , thrust ball bearing and Self - aligning bearing.

39. Along with engine bed speed enhancement, the guide rail use also by skids to rolls the transformations, the ball bearing guide rail and the roller guide rail need quantity rapidly is rising .

40. Bidirectional thrust ball bearing can be used for low speed application.

41. With such a holder, the self-lubrication of the ball bearing operated at high temperature and high vacuum can be accomplished.

41. Sentencedict.com is a online sentence dictionary, on which you can find excellent sentences for a large number of words.

42. Thin walled ball bearing with broken outerring was analyzed deeply, especially analysing.

43. Based on the dynamics and raceway control theory of the rolling bearing, the dynamic model of angular contact ball bearing was set up with consideration of the pretension.

44. The thrust force ball bearing must perform in the work axial pre - tight.

45. The construction of this ball bearing is similar to mounting two single row angular ball bearings back to back(DB).

46. The smoke of steel ball bearing pressure such as depth limit ring precision sure.

47. The pumps include type A structure ( ball bearing ) or type B structure ( sliding bearing ).

48. The twin tandem, a four-row angular contact ball bearing, replaces conventional tapered roller bearings in wheel bearings and contributes significantly to saving fuel.

49. The enterprise harbin bearing group corp. offers among other things thrust ball bearing and Linear motion.

50. Push rod and intermediate shaft must be frequently per year lubricated by ball bearing grease.

51. This bearing is a kind of ong-way thrust ball Bearing without keeper but with encloser and, it is inseparable, It canbear one-way axial loading and its dust prevention effect is good.

52. The double-row angular contact ball bearing with split inner ring (Figure 1.16) serves for carrying high and frequently reversing axial loads.

53. At the same time(Sentencedict.com), the basic frequency is calculated with nonlinear and linear method respectively and the factors to affect the basic frequency of ball bearing vibration are discussed in detail.

54. Well, this critical speed for a small ball bearing would be some hundred meters per second.

55. Grease, Sintered Bearing Oil, Ball Bearing Grease, The Grease used for automotive parts.

56. The transient thermal analysis of the main thrust ball bearing was performed during fuel cut off for an aeroengine oil system.

57. Based on nonlinear relationship of the axial load and displacement of angular contact ball bearing, the experiments to load on coupled bearings are done.

58. Thrust forces are accommodated in both directions by each individual angular contact ball bearing.

59. The design of the aero servo aileron hinges are machined from solid billet and have a self aligning ball bearing pressed into the arm.

60. Adopted ball bearing movement device, high precision guide liner, rack and pinion and servo motor, insure the stable movement with high precision position and operation.